249.png

206 East Dogwood Drive • Franklin, North Carolina 28734

Cell - 828-524-9085 • Office 828-349-9125 • Fax 828-524-4848

DWT PARTS DEPARTMENT PRICE LIST

January, 2019

MASTER REBUILD KITS

Road Race Kit $185.00
Standard Kit $150.00
Low Cost Kit $100.00

GEARS

Reverse Sliding Gears $50.00
1st Gear - stock 32 tooth, 2.78 and 2.32 ratio $100.00
1st Gear - stock 32 tooth with bronze bushing installed $125.00
33 Tooth 1st Gear with Bronze Bushings Installed $150.00
33 tooth 1st Gear 2.90 gear ratio when used with a wide ratio transmission
33 tooth 1st Gear 2.40 gear ratio when used with a close ratio transmission

WIDE RATIO GEARS

4th Gear 1 3/8” large input 3 piece modular $175.00
4th Gear 1 3/8” large input 1 piece $175.00
4th Gear 1 1/16” small input 1 piece $150.00
3rd Gear 25 tooth $100.00
2nd Gear 31 tooth $100.00
Counter Gear - 30 - 24 - 21- 15 tooth count $200.00

CLOSE RATIO GEARS

4th Gear 1 3/8” large input 1 piece $175.00
4th Gear 1 1/16” small input 1 piece $175.00
3rd Gear 25 tooth $100.00
2nd Gear 28 tooth $100.00
Counter Gear - 25 - 21 - 18 - 15 tooth count $200.00
We also have a very large quantity of used like new original ford close ratio counter gears in stock $150.00

MAIN SHAFTS

24 inch long 28 spline $200.00
24 inch long 31 spline $200.00
25 inch long 28 spline $200.00
27 inch long 28 spline $200.00
27 inch long 31 spline $200.00
We also have a very large quantity of used like new original Ford main shafts in stock. $175.00

25 SPLINE MAIN SHAFTS

The defective 25 spline main shaft is an extremely dangerous part.
Do not use this shaft. If you have one of these shafts please contact DWT for some free 25 spline main shaft information.

SYNCHRONIZER ASSEMBLIES

1st + 2nd Gear $150.00
3rd + 4th Gear $125.00
Assemblies include Inner Hub, Outer Hub, two C Springs and three inserts

BEARING RETAINERS

DWT nodular iron.
1964 and older small O.D. CO type for large or small spline inputs $65.00
1965 and newer large O.D. C5 and C6 type for large or small spline inputs $50.00
Installed Small input bearing retainer seal $5.00
Installed Large input bearing retainer seal $10.00

DWT BRONZE BLOCKER RINGS

These are the rings that work - The best of the best $12.00

COUNTER SHAFTS

DWT large counter shaft $35.00
DWT small reverse counter shaft $25.00

MAIN BEARINGS

High quality S.K.F. input and output bearings $30.00
Ultra high quality S.K.F. Road Race bearings $45.00

SHIFT FORKS

1-2 Out of stock
3-4 $75.00

McLEOD SAFETY BELLHOUSINGS

289-302-351 Windsor and Cleveland McLeod $400.00
1979 up Mustang toploader conversion McLeod $400.00
Lakewood universal alignment kit $15.00
*All McLeod bell housings sold by DWT meet or exceed the new 9000 RPM S.F.I. 6.1 specification and
includes the block saver plate, bolt kit, S.F.I. Certified decal attached and all instructions.

SPEEDOMETER GEARS

Green drive gears $55.00
Black, yellow or pink drive gears $30.00
Matching driven gears for black, pink, yellow or green drive gears $15.00
3 piece mounting kit for drive and driven speedometer gears $3.00

TRANSMISSION TOP COVERS

DWT transmission top cover black powder coated $20.00

ID TAGS

New HEH and RUG toploader ID tags stainless steel w/rivet, stamped. $20.00
Correct for any toploader.
DWT also has a very large supply of original Ford tags in stock call for availability.

USED BELLHOUSINGS

We try to keep used original Ford Bellhousings in stock. Call for availability and prices.

NEW TOPLODER MAINCASES

8 mounting holes with drain plug hole:     Cast Iron     32 lbs.

NEW RAIL KITS

3 rails - 5 detents -1 set screw - 1 interloc pin $125.00

SMALL PARTS KITS

All snap rings, spacers, all needle bearings, $40.00
thrush washers, dowel pins, speedometer ball.
C springs, all long and short synchronizer inserts, and all
detent springs.

CAM AND SHAFTS

1-2 or, 3-4 $40.00

1964-1965 FALCON AND COMET TRASMISSION AND SHIFTER INFORMATION

DWT has a 10 page supplement for the 1964-1965 Falcon and Comet transmission that covers themaincase, main shaft, bearing retainer, tailhousing, shifter, and shifter installation kit. Please contact DWT for a FREE copy.

INSTALLING A TOPLOADER TRANSMISSION IN A 1979-UP MUSTANG

DWT Has a guide that covers the bellhousing, transmission, tailhousing, shifter and mount. Please contact DWT for a FREE copy.

ORDERING PARTS

There are 133 different toploader transmissions. To order parts, we must know the HEH or RUG tag information, the gear ratio, year of the car, transmission length, the first three case and tailhousing casting numbers, engine size and number of splines on the output shaft, NOTE: if the transmission has a 28 tooth 2nd gear, it is a 2.32 close ratio transmission. If it has a 31 tooth 2nd gear it is a 2.78 wide ratio transmission. To order shifters, the first three casting numbers on the tailhousing would be most important. To order speedometer gears, we need to know the first three tailhousing casting numbers, rear end gear ratio and the tire size, also if your car is equipped with a factory Steward Warner speedometer adapter. NOTE: We do not have parts for T-5, T-10, 3-speed, Muncie, Dagenham, power slides, Mexican overdrives, etc., only top loader 4-speed parts.

SHIPPING ADDRESS

We can ship parts and transmissions to any address that you provide to us. You need to provide an address where someone will be available to receive your shipment. If you will be away on vacation, you will be at your job all day, if you live in a neighborhood where crime is especially bad, or if you live in a apartment or housing complex where packages are dropped off at the mailboxes out in the parking lot. It would be a good idea not to have anything shipped to these locations. Instead provide a alterative address. If you have a relative, neighbor, girlfriend, or retired person that will be home all day. Or you can have your shipment sent to you or your wife’s place of employment or the shop working on your car. Any safe location, Barber Shop, Auto Parts Store, Hardware Store, Etc. that will receive and hold your shipment for you. We can also send your shipments to the UPS terminal closest to you and have UPS hold the shipment for customer pickup. If we send the shipment and the carrier delivered the shipment then we both did our part. You need to do your part and provide a safe location to receive your shipment. Our goal is that your shipment from DWT arrives safely with no problems. At DWT we know the correct way to pack shipments. If there is any shipping damage to your package you will need to contact the carrier ASAP to inspect the damage.

BUYING A USED TOPLOADER TRANSMISSION

Before buying a used Toploader, call D.W.T. with the HEH or RUG tag information, the first three casting number on the tail housing, the first two numbers on the main case and how many teeth are on 2nd gear, 28 or 31 teeth. It also would be a good idea to count the output shaft splines. We can help you; call us before you buy the transmission, not after. A lot of people call after they bought a three speed Toploader, a Mexican overdrive, a Dagaham or a Borg Warner T10 transmission or just the wrong Toploader transmission. We can advise you if you are buying the right or wrong transmission, or what it will take to make the wrong transmission work in your car or project. Call us, it won’t cost you anything. We are here to help you get the right transmission.

NEW TOPLOADER TAIL HOUSINGS - 14’’ LONG

With Falcon, Fairlane, Comet, Mustang, Maverick, Cougar, Cyclone, 427 Cobra, and Pickup Truck shifter locations.
Cast Iron 28 spline 21 lbs.
Cast Iron 31 spline 21 lbs. $350.00
Aluminum 28 spline 9 lbs. $350.00
Aluminum 31 spline 9 lbs.

USED TAIL HOUSINGS

We have a very large supply of original Ford Toploader tail housings. All tail housings are hot tanked, glass beaded, painted with cast blast, a new bushing, seal and a Stewart Warner air vent is installed. We should have the tail housing you need in stock. Call for prices. NOTE: We take trade-ins on tail housings. Now is the time to get the right tail housing for your next project.

HURST SHIFTER INFORMATION

We are no longer a dealer for Hurst shifters. We dropped Hurst shifters when Mr. Gasket sold Hurst to B & M. We still have some new old stock Hurst inventory from Mr. Gasket that we would like to sell at some attractive prices. Very limited supply.

HURST SHIFTER ACCESSORIES

Hurst Knob Mr. Gasket Style $10.00
B 4 Rubber boot $25.00
Black or white classic knob $20.00
Back up switch w/bracket $25.00
Hurst T-handle $30.00
1970 - 1971 Hurst/Ford T-handle $35.00
DWT new round rubber boot w/polished stainless
steel ring and stainless steel hardware $75.00
Ford shifter knobs by Scott Drake 63-67 style, Falcon
Galaxie, Tiger, Comet, 289 Cobra, Griffith, T.V.R.,
427 Cobra, 64-65 Fairlane, Cyclone, etc. $20.00

HURST SHIFTERS

#391-8789   Falcon & Comet w/B-W, T10 Transmission $300.00
#491-0001   Super Shifter 3 $350.00
#391-7535   Street Super Shifter $300.00

INSTALLATION KITS

#373-3164   Falcon & Comet w/B-W, T10 Transmission $175.00
#373-0014  Super Shifter 3 $200.00
#373-3166   Galaxie & Fairlane w/B-W, T10 Transmission $175.00

DWT OBSOLETE INSTALLATION KITS

#373-3165  64-65 Falcon & Comet $150.00
#373-3167  Galaxie, Full Size, Tiger, 289 Cobra, and 64-65 Fairlane $150.00

GEAR RATIOS

First Gear ratio
w/Stock 32 tooth
First Gear ratio
w/DWT 33 tooth
First Gear Second Third Fourth Reverse First Gear
Close Ratio: 2.32 1.69 1.29 1.1 2.32 2.40
Wide Ratio: 2.78 1.93 1.36 1.1 2.78 2.90

USED PARTS

We have used parts available, cases, main shafts, tail housings, gears, ect. Call for availability and prices.

CORRECT TAIL HOUSING AND MAIN SHAFT

If you have the wrong tail housing or main shaft for your car D.W.T. can fix this problem. Don’t try puttingthat Galaxie transmission in your Mustang. You most likely will be doing a few thousand dollars of damageto the car. We see this all the time. Instead call D.W.T. We have every tail housing and main shaft in stock.You won’t need to destroy your car putting in the wrong transmission. You can trade in your wrong tail housingand main shaft for the correct parts.

HELP

If you need help, advice or have any questions, please contact DWT, we are here to help you get yourtoploader back in new condition. We sincerely appreciate your patronage.